Electronic Steering Column Lock Control Module -J764-, REMOVING AND INSTALLING, VERSION 2: Installing
Install in reverse order of removal. Note the following:
-- Secure the Electronic Steering Column Lock Control Module - J764- -1- to the mounting plate -2- with new shear bolts -arrows-.
-- Tighten the shear bolts -arrows- evenly until the bolt heads shear off.
-- If the Electronic Steering Column Lock Control Module - J764- was replaced, it must be adapted by selecting the "Replace" function on the Electronic Parts Information (ETKA) in the "Guided Function".
-- Perform the Steering Angle Sensor -G85- basic setting using the Vehicle Diagnostic Tester.