Electronic Steering Column Lock Control Module - J764-, REMOVING AND INSTALLING, VERSION 1: Removing
-- Remove the steering column switch module. Refer to STEERING COLUMN SWITCH MODULE, REMOVING AND INSTALLING .
-- Disconnect the connector -2-. To do so, push the retainer -1- toward the rear and push down the release.
-- Remove the shear bolt -3- using the : T10424US
-- Remove the Electronic Steering Column Lock Control Module -J764- -4-.
NOTE:
If the shear bolt cannot be removed using the 7/16 Inch Extractor: T10424US , it must be drilled out using an angle drill and an 8.5 mm diameter drill bit.