Windshield Projection Head Up Display Control Module J898, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

If the control module is replaced, perform the test plan for replacing the windshield projection control module.

-- Perform the "windshield projection head up display control module, replacing" function using the Vehicle Diagnostic Tester. Refer to the appropriate Service Information .

Continuation

-- Remove the windshield. Refer to WINDSHIELD, REMOVING AND INSTALLING .

-- Remove the lighting strip. Refer to DYNAMIC LIGHTING STRIP 3 FOR INFORMATION L385, REMOVING AND INSTALLING .

-- Remove the windshield projection cover. Refer to INSTRUMENT PANEL DECORATIVE TRIM, REMOVING AND INSTALLING .

-- Move instrument panel noise insulation to the side.

-- Cover the control module -1- with a soft cleaning cloth.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows-.

-- Remove the control module -1-.

-- Disconnect the connectors.

-- Remove the control module -1-.