Rain/Light Recognition Sensor, Removing And Installing: Notes

The Rain/Light Recognition Sensor -G397- has a silicone layer as a contact surface to the windshield.

The Rain/Light Recognition Sensor -G397- is designed so that it can be used again. The only requirement to use it again is that the connecting pad must not be damaged or dirty (check the connecting pad).

If a Rain/Light Recognition Sensor -G397- is replaced with a Rain/Light Recognition Sensor -G397- with a different part number, the new Rain/Light Recognition Sensor -G397-. Refer to Vehicle Diagnostic Tester.

The Rain/Light Recognition Sensor -G397- cannot be optionally installed. For the correct Rain/Light Recognition Sensor -G397-. Refer to the Parts Information.