Windshield Wiper Motor, Replacing: Notes
Special tools and workshop equipment required
- Torque Screwdriver:VAG1624
- Torque Wrench, 6-50Nm:VAG1331A
- Puller - Wiper Arm Kit:T10369
- Pry Lever:80-200
WARNING:
Risk of injury!
- There is a risk of pinching when operating an uncovered windshield wiper system.
- The windshield wiper system can only be operated when installed.
CAUTION:
There is a risk of damaging the hood and the windshield wiper arms.
- Before operating the windshield wiper system with the hood open, make sure there is enough clearance for the moving components.
NOTE:
The latch must be engaged in the >>closed<< position so that the windshield wiper system can be operated with the hood open.