Overview - Ignition System

Fig 1: Exploded View Of Ignition System

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- Replace after removing
- 22 Nm
Knock Sensor 1 -G61-
- Under the intake manifold behind the Engine Temperature Control Actuator -N493-.
- Refer to KNOCK SENSOR 1 G61, REMOVING AND INSTALLING .
Spark Plug
- Refer to Spark Plugs, Replacing.
Spark Plug Connectors
- Refer to Ignition Coil With Power Output Stage, Removing and Installing .
Ignition Coil with Power Output Stage
- Ignition Coil 1 with Power Output Stage -N70-
- Ignition Coil 2 with Power Output Stage -N127-
- Ignition Coil 3 with Power Output Stage -N291-
- Ignition Coil 4 with Power Output Stage -N292-
- Refer to Ignition Coil With Power Output Stage, Removing and Installing .
Double Bolt
- thread cutting
- In the existing threads: 9 Nm
- In the new tapping threads: 10 Nm
Nut
- 9 Nm
Bolt
- thread cutting
- 9 Nm
Camshaft Position Sensor 3 -G300-
- Refer to CAMSHAFT POSITION SENSOR, REMOVING AND INSTALLING .
O-Ring
O-Ring
Camshaft Position Sensor -G40-
- Refer to CAMSHAFT POSITION SENSOR, REMOVING AND INSTALLING .
Bolt
- 9 Nm
O-Ring
Engine Speed Sensor -G28-
- Refer to ENGINE SPEED SENSOR G28, REMOVING AND INSTALLING .
Bolt
- Replace after removing
- 8 Nm