Control Module For Adaptive Cruise Control J428, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
The Control Module for Adaptive Cruise Control -J428- will be called the control module in the information that follows.
If the control module is replaced, the test plan for replacing the control module must be performed.
-- Perform the function "Control Module for Adaptive Cruise Control" using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .
Continuation
-- Open the hood.
-- Disconnect the connector -2-.
-- Remove the bolts -1-.
-- Remove the bracket -3- with the control module.