Peripheral Camera Control Module J928, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

If the Control Module Is Replaced, the Test Plan for Replacing the Control Module Must Be Performed.

-- Perform the function "peripheral camera control module, replacing" using the Vehicle Diagnostic Tester. Refer to Diagnostic Entries .

Continuation

-- Remove the seat pan. Refer to SEAT PAN, REMOVING AND INSTALLING .

-- Disconnect the connectors.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the expanding rivets -2- and remove the control module -1-.

-- Remove the Peripheral Camera Control Module - J928-. Refer to Peripheral Camera Control Module J928, Removing and Installing .

-- Remove the nuts -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bracket.