Seats (Front) And Heater Pad - Replacement
- Seats
- Replace the complete front seat
- Preparations
- Removing front seats
- Installing front seats
- Removing seat rails (does not apply to power seats)
- Installing seat rails (does not apply to power seats)
- Removing seat rails (lower section)
- Removing the bracket for the seat frame from the seat frame
- Installing the seat rail on the frame (with the gas strut)
- Installing seat rails (lower section)
- Replace the temperature sensors
- Notes
- A: Replace the engine coolant temperature sensor
- B: Replace the evaporator sensor
- C: Replace the outside temperature sensor
- D: Replace the passenger compartment temperature sensor
- E: Replace the sun sensor
- Replace the recirculation damper motor
- Replace the temperature damper motor
- Adjust the temperature damper motor
- Replace the air distribution damper motor
- Replacing backrest upholstery
- Replacing center console
- Replacing coolant
- Heater pad backrest, replacing
- Notes
- Preparations
- General information about different types of heater pads
- General information about foam filling
- Foam filling with only front-rear channels
- Foam filling with front-rear channels and one lateral channel
- Foam filling with front-rear channels, one lateral channel and a design channel
- Foam filling with front-rear channels, two lateral channels and a design channel
- Foam filling with linked front-rear channels, two lateral channels and a design channel
- Replacing heating pads
- Installing heater pads
- Heating/ventilation, complete replacement
- Replace the complete front seat