Signal too high. Permanent fault: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Gear selector in position P.
• Start the car.
• Read off the current through the solenoid circuit.
• Depress the accelerator pedal (AP) slowly.

  The current should decrease as the accelerator pedal (AP) is depressed.

  Fig 2: Identifying VCT2000

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the current reduce when the accelerator pedal (AP) is depressed? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information