Intermittent fault
Check wiring between control module #A52 and transmission connector #24 and between control module #A70 (#B10) and transmission connector #25 for an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults .
Check wiring between transmission connector #24 and #25 and the line pressure solenoid connectors for an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults .
Remedy as necessary.
Other information:
- To connect the breakout box, see Connecting breakout box, Transmission control module (TCM) .
- To disconnect transmission connector, see Inspecting/cable harness to solenoids .
- To check/replace shift solenoid STH, see Inspecting/replacing solenoids .
- For information about signals, see Signal specification, Transmission control module (TCM) .
Select Continue when the fault has been remedied.
- Continue
Refer to Information