Signal too low: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Reinstall connectors, components etc.
• Raise car so that drive wheels are unimpeded.
• Start the engine and let it idle.
• Gear selector in position D so the front wheels start to rotate.
• Read off the transmission speed.

  Depress the accelerator pedal (AP) and check that engine speed (RPM) is updated

  Fig 3: Identifying VCT2000

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is engine speed (RPM) updated? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information