Intermittent fault
Check the wiring between transmission control module (TCM) #A49 (#A49) and transmission connector B #3 and between control module #A67 (#B7) and between transmission connector B #6 for an intermittent short-circuit to ground according to Short-circuit to ground, intermittent faults .
HINT: Check solenoid SLS by measuring the resistance between #3 and #6 on transmission connector B. The ohmmeter should read 5-5.6 Ω (at 20°C).
Remedy as necessary.
Other information:
- To connect the breakout box, see Connecting the breakout box .
- To disconnect transmission connector B, see Connectors, transmission, disconnecting/connecting .
- For information about signals, see Signal description. Transmission control module (TCM) .
Select Continue when the fault has been remedied.
- Continue
Refer to Information