October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installing engine control module (ECM)
Courtesy of VOLVO CARS OF NORTH AMERICA.
- Plug in the connectors and check so that they are connected correctly.
- Install the engine control module and install the cable clamp.
- Install both screws (B) and tighten with fingers.
- Install the safety brace (C) with 2 new shear screws, tighten with fingers.
- Tighten the screws (B) with 10 Nm
and the shear screws (2 pcs.) until the screw heads break off.
- Check that the casing's seal is positioned correctly and is intact.
- Install the casing and tighten the screws.