Signal outside its permitted range: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.
• Connect the connectors, install the components, etc.
• Ignition on.
• Check that the ABS warning lamp lights and goes out after approximately 2 seconds. If the lamp does not go out, the fault has not been rectified.
• Test-drive the car as described in Test driving .

  Check the ABS warning lamp during the test drive. If the warning lamp lights, return to the workshop and read the diagnostic trouble codes.

  Fig 3: Identifying Test Drive

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the lamp go out and stay out? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information