Signal missing: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reinstall the components, reconnect the connectors etc.
• Raise the car so that the relevant wheel is clear of the ground
• Ignition on
• Read off the wheel speed for the relevant wheel.

  Spin the relevant wheel and check that the wheel speed is updated.

  NOTE: The speed signal will only be active for approximately 20 seconds. Activate the function again if necessary.
  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the wheel speed updated? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information