Pedal Position Sensor
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.
The pedal position sensor is mounted on the power brake booster in the engine compartment. The sensor, which responds to the push rod for the pedal, is a sliding potentiometer. 0 mm corresponds to 0 V and 38.5 mm movement corresponds to approximately 95 % of battery voltage (Ubat ).
The pedal position sensor signal is used to check the function of the stop (brake) lamp switch.
The pedal position sensor is directly connected to the engine control module (ECM). This pedal position sensor has no ABS function.