Connector, Green (16- Pin)
Before taking any readings, read Connecting the breakout box and checking the ground terminals .
Terminals C1-C16 correspond to terminals 25-40 on the breakout box.
| Terminal | Terminal on the breakout box | Signal type | Not operated | During operation | Other |
|---|---|---|---|---|---|
| #C1 | #25 | Memory button 2 (2) | U= 5 V | U = Ulow | |
| #C2 | #26 | Memory button 1 (1) | U= 5 V | U = Ulow | |
| #C3 | #27 | Programming button | U= 5 V | U = Ulow | |
| #C4 | #28 | Control panel connected control circuit (LH/RH IP) | U =1.5-2.0 V | U =1.5-2.0 V | With the control panel connected |
| #C5 | #29 | Control panel connected to control circuit (LH/RH OP) | U =1.5-2.0 V | U =1.5-2.0 V | With the control panel connected |
| #C6 | #30 | Control panel ground lead (R31) | U = Ulow | U = Ulow | |
| #C7 | #31 | Control panel ground lead (R31) | U = Ulow | U = Ulow | |
| #C8 | #32 | Control signal (R1+), front-rear adjustment forward | U = Ubat | U = Ulow | |
| #C9 | #33 | Control signal (R1-), front-rear adjustment backward | U = Ubat | U = Ulow | |
| #C10 | #34 | Control signal (R2+), backrest forward | U = Ubat | U = Ulow | |
| #C11 | #35 | Control signal (R2-), backrest backward | U = Ubat | U = Ulow | |
| #C12 | #36 | Control signal (R3+), rear height adjustment upwards | U = Ubat | U = Ulow | |
| #C13 | #37 | Control signal (R3-), rear height adjustment downward | U = Ubat | U = Ulow | |
| #C14 | #38 | Control signal (R4+), front height adjustment upwards | U = Ubat | U = Ulow | |
| #C15 | #39 | Control signal (R4-), front height adjustment downward | U= 5 V | U = Ulow | |
| #C16 | #40 | Memory button 3 (3) | U= 5 V | U = Ulow |