Programming using the Volvo Scan Tool (ST)

Fig 1: Identifying Volvo Scan Tool

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Disconnect the Volvo Scan Tool (ST) from the VIDA-station. Connect the Volvo Scan Tool (ST) to the data link connector (DLC) as a stand alone tool. See Connecting the Volvo Sytem Tester
• Start the Volvo Scan Tool (ST). Select language, model, bodywork and seat
• Select "Entry position".
• Press "Enter".

Completion 

The preset entry position is now programmed into the control module.

Switch off the Volvo Scan Tool (ST) and disconnect it from the car.