Description Of The Customer Parameters In The Combined Instrument Panel (Driver Information Module)

Total mileage, value

Measurement range 0-999999 km or 0-999999 miles. The parameter can only be programmed once before the read off mileage exceeds 500 km or 310 miles. Programmed by the central electronic module (CEM) after replacing the control module.

Distance conditions for service, value

Indicates the distance driven required to light the service reminder indicator (SRI). The value set for metric calibrated instruments are 5000, 7500, 10000, 12000, 15000 or 20000 km. The value set for imperial calibrated instruments are 2500, 5000, 6000, 7500, 10000 or 12500 miles.

Time conditions for service, value

Indicates the time period required to light the service reminder indicator (SRI). The value set is 6, 12, 18 or 24 months.

Engine run time conditions for service, value

Indicates the engine run period required to light the service reminder indicator (SRI). The value set is 500, 750 or 1000 hours.

Displaying zeroes, value

Setting the instrument panel to display or not display the zeroes.

Temperature unit, value

The temperature unit of measurement can be selected. Temperature display can be selected between Celsius or Fahrenheit.

Trip computer unit, value

Setting the trip computer (applies only to cars with trip computer). It is possible to select liters, Imperial gallons or US gallons.

Clock position, value

12- or 24- hour display.

Mileage at service, value

Reading off the mileage at service. The parameter can be programmed between 0 -999999 km or miles. When resetting the service reminder indicator (SRI) the parameter is reprogrammed by copying the mileage.

CAUTION:

Mileage at service should be used with total mileage to determine whether a service is due.

Time at service, value

Reading off global time at service. The parameter can be between 0 -163 months (13.6 years). When resetting the service reminder indicator (SRI) the parameter is reprogrammed by copying the global time in the central electronic module (CEM) to the combined instrument panel (DIM).

CAUTION:

Time at service and global time should be used with time conditions to determine whether a service is due.

Engine hours since service, value

Parameter read off. Indicates how many hours the engine has run since the last service. The parameter can be between 0 -65536 hours. Reset when resetting the Service reminder indicator (SRI).

CAUTION:

Engine time since service should be used with engine hours to service to determine whether a service is due.

Global time, value

Reading off the clock in the central electronic module (CEM). The parameter can be between 0 -163 months (13.6 years).

CAUTION:

Time at service and global time should be used with time conditions to determine whether a service is due.