LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2003 >> S60 Base, 2.4 64 >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment - Specifications & Procedures >> Wheel Alignment Procedures >> Toe-In Adjustment >> Rear Adjustment
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rear Adjustment

  1. Loosen the inner nut on the tie rod. Adjust the toe-in to specification. See WHEEL ALIGNMENT SPECIFICATIONS  . Use the eccentric bolt. See Fig 1 . Tighten the nuts slightly.
  2. Check the thrust angle. If it is outside the value given, loosen the nuts and adjust the toe-in again. Tighten the nut to specification. See TORQUE SPECIFICATIONS  . Check the toe-in again. Check the thrust angle.
Fig 1: Identifying Rear Toe-In Adjustment Bolt
G00240526Courtesy of VOLVO CARS OF NORTH AMERICA.
scientia non olet · About LEMON Manuals