Systems Settings
The following system settings in the road traffic information (RTI) control module can regain the base values if the road traffic information (RTI) control module power supply fails, when the road traffic information (RTI) control module or the battery are disconnected over a longer period of time for example. The Road Traffic Information (RTI) control module is always supplied with base values. After the road traffic information (RTI) control module is connected, or the power supply returned, the road traffic information (RTI) control module settings should be adjusted to the previous market and customer settings.
- Select systems settings from main menu
| Parameter | Setting, selection |
|---|---|
| Volume for voice message | OFF/1/2/3/4/5 Base value = 3 |
| At top of map | North/Route Base value = Route |
| Use toll roads | Yes/No Base value = Yes |
| Text with map | Yes/No Base value = Yes |
| Screen saver | Yes/No Base value = No |
| Display names of institutions | On/Off Base value = On |
| Display establishment symbol | On/Off Base value = On |
| Display street names on map | On/Off Base value = On |
| Distance unit | km/miles Base value = km |
| TMC Filter | On/Off Base value = Off |
| TMC filter setting | The possibility of deselecting the traffic information which you think is unnecessary or already know about. |
| TMC Search | For locations where several stations compete with each other. |
| Turn by Turn mode | On/Off Base value = On |
| Auto route recalculation | On/Off Base value = On |
| Detailed intersection map | On/Off Base value = On |
| Advanced destination setting. | On/Off Base value = Off |
| GPS information | |
| Language |