Diagnostic Trouble Code (DTC) Information AUD-001B
Condition
The Audio module (AUD) checks the software in the control module.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- Incorrect or no settings in the local configuration file.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Start up of the MOST network.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- The control module assumes standard configuration.
Possible Source
- Software download is not complete.
- Damaged audio module (AUD).
Fault symptom[s]
- Poor or bad sound
- No sound from loudspeakers