Removing The Control Module

Fig 1: Identifying Bulb Holder

Courtesy of VOLVO CARS CORPORATION

• Remove the lens.
• Remove the 2 screws at the front edge.
• Press the 2 rear catches forward.
• Press two of the catches on one side inwards. Remove the bulb holder.
• Disconnect the 2 connectors.
• Disconnect the ground lead.

HINT: Only certain versions of the upper electronic module (UEM) have a ground lead. 

Fig 2: Identifying Removal Of Rear View Mirror/Control Module

Courtesy of VOLVO CARS CORPORATION

• Remove the control module connector cover.

Fig 3: Identifying Removal Of Rear View Mirror Connector

Courtesy of VOLVO CARS CORPORATION

• Flip the anti-dazzle button toward the lens. Disconnect the connector in the control module by pressing the catch through the opening. Use a screwdriver.
• Remove the screw from the control module.
• Remove the control module.