Signal Missing. Permanent Fault: Verification: Verification

HINT: After the repair it is necessary to check that the fault has been rectified. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

Fig 2: Connecting Connector

Courtesy of VOLVO CARS CORPORATION

• Ignition off.
• Connect the connectors, install the components, etc.
• Ignition on.

  Read main beam relay.

  Activate main beam.

  With main beam on, the value should be "on" and when main beam is switched off, the value should be "off".

  Fig 3: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Does it work? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION