Checking The Indicator Shunt
Check that the direction indicator shunt is fitted correctly.
At the same time check the connections, in particular the relay connection according to the table below, for an intermittent short circuit to voltage supply as described in, see SHORT-CIRCUIT TO SUPPLY VOLTAGE, INTERMITTENT FAULTS , contact resistance and oxidation as described in CONTACT RESISTANCE AND OXIDATION and a loose contact as described in LOOSE CONNECTIONS (TERMINALS) .
| Diagnostic trouble code | Relay |
| CEM-8F02 | 20/32 3 |
| CEM-8F03 | 20/34 3 |
Additional information:
- To replace the shunt for the direction indicator:
- For -2004, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .
- For 2005-, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .