Programming The Home Safe Lights

The home safe lights can be programmed to stay on for a longer or shorter time according to the wishes of the customer.

The factory setting is 30 seconds. The time can be set to 0, 30, 60 or 90 seconds.

Read off the programming using the VCT2000 (or appropriate scan tool).

To change the time set, mark the desired value in the scrolling list and start programming.

Fig 1: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION

• Continue 

  Refer to SAVE THE PROGRAMMED VALUE