Checking The Function Of The Warning Lamp For The Generator (Gen) In The Combined Instrument Panel (Driver Information Module): Verification
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Check that the "Generator not charging" warning lamp lights when the ignition is switched on. The lamp will go out if the engine is not started 5 seconds after the ignition is switched on.
If the engine is started, the lamps will go out if there is no fault.
HINT: The warning lamp can also be tested by activating a test of needles and lamps. Check that the warning lamp for the generator (GEN) lights.
Does the warning lamp light?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
Refer to INFORMATION