Connecting The Test Box

Fig 1: Breakout Box

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Remove interior fuse 24 (11C/24)
• Loosen the combined instrument as described in, see DRIVER INFORMATION MODULE (DIM), REPLACING
• Release control unit connector.

Connect adapter see 9511463 (22-16-14-pin) to control unit connector and connect test box see 9511428 and wire see 9511499 to adapter.

Alternatively connect test box see 9813190 to adapter.

Disconnect the test box in the reverse order.

Fig 2: Identifying Control Module Connector & Locking Handle

Courtesy of VOLVO CARS CORPORATION

Additional information: 

• To remove the combined instrument, see DRIVER INFORMATION MODULE (DIM), REPLACING
• For information about signals and other values, see DRIVER INFORMATION MODULE (DIM) SIGNAL DESCRIPTION .