Reading Off the Programmed Values
This function can be used to read off programmed data and to program data into the control module. The purpose of the programming is to adapt the control module to the car version or when the driver requests that certain adjustments are made to the settings.
NOTE:
Before replacing a control module all programmed data must be read off first if this is possible. The information will then be entered into the new control module after it has been installed.
Driver position
Indicates the driver's position to automatically start the driver's seat heating when the outside temperature is below 0°C (32°F).
Seat temperature
Indicates which temperature the right and left seats should retain at high and low level seat heating. Off if the car is not equipped with seat heating.
Timer heated rear window and door mirrors
Indicates if the heated rear window will be deactivated after engagement for 12 minutes.