Checking component and wiring
Check cable between engine control module (ECM) #B46 and combined instrument panel #4 for a short-circuit to supply voltage according to Short-circuit to supply voltage. Permanent faults .
Remedy as necessary.
Other information:
- For connection of engine control module (ECM) breakout box, see Connecting the breakout box .
- To connect the combined instrument panel breakout box, see Connecting the Driver Information Module (DIM) test box
- To access/replace the combined instrument panel, see Driver information module (DIM), replacing
- For information about signals on 5-cylinder, see Signal specification .
- For information about signals on 6-cylinder, see Signal specification .
- For information about the combined instrument panel connector, see Driver Information Module (DIM) signal description .
- Continue
Refer to Verification