Electronic Throttle Control Module: Service and Repair

Throttle Body (Electronic Throttle Module (ETM)), Replacing

Removing the throttle body (TB)







- Remove the hose clamp on the inlet hose at the throttle body (TB).
- Remove the inlet hose from the throttle body (TB).

Remove/Slacken off:







- 4 screws
- the connector
- the gasket.

Installing the throttle body (TB)

Install:







- the throttle body (TB). Use a new gasket
- the connector to the throttle body (TB)
- the inlet hose with the hose clamp.

Remedy as necessary.