Reading Off Input And Output Signals
Using this function, the values and status of the control module input and output signals can be continuously read off.
The following parameters can be read off:
- speed, input signal
- engine speed (RPM), input signal
- engine coolant temperature (ECT), input signal
- outside temperature, input signal
- manipulated odometer
- fuel volume, calculated / attenuated
- gas volume, calculated / attenuated
- gas fuel finished
- status of the clock adjustment knob, input signal
- trip computer reset button, input signal
- trip computer mode selector, input signal
- trip odometer reset button, input signal
- high engine coolant temperature (ECT), warning lamp
- low fuel level, warning lamp
- outside temperature warning lamp
- mileage since service
- mileage to service
- engine hours since service
- time since service
- time remaining until service
- engine hours to service.
For further information about parameters, see Description of parameters .