LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volvo >> 2004 >> V70 Base, 2.4 61, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control Module (ECM) Diagnostic Trouble Codes (DTC) - 11 Of 14 >> ECM-903F: Throttle Position (TP), Signal Too High (B5234T3; B5244T3; 2001) >> Signal too high >> Information, software and throttle >> Fault-tracing information, software
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fault-tracing information, software

Fig 1: Identifying Ignition On Position
GLL101053Courtesy of VOLVO CARS OF NORTH AMERICA.

The fault tracing that follows depends on whether the software in the control module is upgraded. The control module's software version can be read out using VIDA vehicle communication.

Check, using the identification of the upgraded software Engine control module (ECM)/Electronic throttle module (ETM) that the correct software is in the Electronic throttle module (ETM) and the Engine control module (ECM). Identifying upgraded software ECM/ETM

Select one of the following options: 

  1. The software is not upgraded.

    Refer to Fault-tracing information, mismatched throttle angle 

  2. The software is upgraded.

    Refer to Fault-tracing information, undesirable throttle angle 

Fig 2: Identifying VCT2000 Diagnostic Tool
GLL100564Courtesy of VOLVO CARS OF NORTH AMERICA.