Linear pressure solenoid SLT, current
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.
The value indicates the current passing through the solenoid circuit. Low current gives a higher control pressure which results in a higher system pressure. Solenoid control is directly dependent on the accelerator pedal signal. The higher the signal from the accelerator pedal sensor, the lower the current through the solenoid and therefore the higher the system pressure.
Measurement range: 0 - 1000 mA.
Normal value with accelerator pedal released: approx. 1000 mA.