Checking The Cable
- Ignition off
- Disconnect the connector from the central electronic module (CEM)
- Disconnect connector (9/13) from the front right seat heater.
Check the signal cable between central electronic module (CEM) terminal #4C and front right seat heater (9/13) connector terminal #2. Check for a short-circuit to ground. Check for an open-circuit.
Remedy as necessary.
Other information:
- For -2004, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .
- For 2005-, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .
- To connect the breakout box, see CONNECTING THE BREAKOUT BOX
- -2004: SIGNAL SPECIFICATION
- 2005-: SIGNAL SPECIFICATION
- see CHECKING WIRING AND TERMINALS .
Is the cable OK?
- YES
Refer to VERIFICATION
- NO
Refer to REPLACING THE COMPONENT