Checking The Cable
Check the cable between the central electronic module (CEM) terminal #1A and the back-up (reversing) lamp switch terminal #2 (3/10). Check for a short-circuit to ground.
Remedy as necessary.
Other information:
- For information on the central electronic module (CEM):
- For -2004, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING
- For 2005-, see: CENTRAL ELECTRONIC MODULE (CEM), REPLACING .
- To access the back-up (reversing) lamp switch, see BACK-UP LAMP SWITCH, REPLACING
- see CHECKING WIRING AND TERMINALS .
Was a fault detected?
- YES
Refer to VERIFICATION
- NO
Refer to REPLACING THE COMPONENT