Connecting The Breakout Box

Special tools: 

see 9512901

see 9511428

see 9511499

see 9813190

Fig 1: Breakout Box

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Remove the fuse
• Remove the driver information module (DIM)
• Disconnect the control module connector.

Connect adapter see 9512901 to the control module connector. Connect breakout box see 9511428 and wiring see 9511499 to the adapter.

Alternatively, breakout box see 9813190 can be connected to the adapter.

Disconnect the breakout box in reverse order.

Other information: 

• see DRIVER INFORMATION MODULE (DIM), REPLACING
• see SIGNAL SPECIFICATION