Diagnostic trouble code (DTC) information ECM-1410
Condition
The diagnostic trouble code (DTC) is stored if the outside temperature sensor signal is higher than the calculated signal.
The diagnostic trouble code (DTC) can be diagnosed after 5 minutes driving at an engine speed above 1700 rpm and a speed above 50 km/h.
Substitute Value
- The value from the engine intake air temperature (IAT) sensor.
Possible Source
- Contact resistance in the terminals
- Damaged outside temperature sensor
- Damaged intake air temperature (IAT) sensor.
Fault symptom[s]
- Malfunction indicator lamp (MIL) lit.