Signal too high: Verification: Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Engine Start Verification

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reconnect the connectors, reinstall components etc.
• Test drive the car according to the TRIP schedule. See Verifying repairs .

  Connect Volvo VIDA diagnostic equipment diagnostic equipment again and read out the difference between the front and rear heated oxygen sensors (HO2S).

  The value must be lower than +/-0.01.

  Fig 3: Identifying VCT2000 Diagnostic Tool

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 4: Identifying Front Heated Oxygen Sensor

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Is the value lower than +/- 0.01? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to Information