Reading off the control module identification
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.
VIDA identifies control modules by reading off a number of codes from the control module memory.
The codes contain information about the control module:
- hardware P/N (control module without software)
- hardware serial number (control module without software)
- software P/N
- diagnostic software P/N
- P/N slave nodes (inclination sensor module (ISM))
- CAN frame period (40 ms for the CAN low-speed network at time of writing)
- Subcontractor identification plate (ECU-ID).
VIDA identifies control modules by reading off a number of codes from the control module memory.
The codes contain information about the control module:
- hardware P/N (control module without software)
- hardware serial number (control module without software)
- software P/N
- diagnostic software P/N
- P/N slave nodes (inclination sensor module (ISM))
- CAN frame period (40 ms for the CAN low-speed network at time of writing)
- Subcontractor identification plate (ECU-ID).