Diagnostic trouble code (DTC) information SAS-000C

Condition 

Fig 1: Identifying Steering Wheel Control Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

The Steering wheel angle sensor module (SAS) is located in the lever module together with the steering wheel module (SWM) and is supplied with power by it.

The diagnostic trouble code (DTC) is stored if the steering wheel angle sensor module (SAS) registers an internal fault.

The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on and the steering wheel angle sensor is initiated. Initiation is carried out when the steering wheel is turned more than 4.5° in any direction.

Substitute Value 

• The stability function is blocked.

Possible Source 

• Internal fault in the steering wheel angle sensor module (SAS).

Fault symptom[s] 

• Anti-spin warning lamp lit.
• General warning lamp lit.
• The stability control system does not function.