Diagnostic Trouble Code (DTC) Information DDM/PDM-E010

Condition 

Fig 1: Identifying Motor

Courtesy of VOLVO CARS CORPORATION

The diagnostic trouble code (DTC) is stored if the supply voltage to the driver door module/passenger door module (DDM/PDM) differs by more than 2.5 V from the supply voltage to the central electronic module (CEM).

The driver door module/passenger door module (DDM/PDM) receives information about the supply voltage to the central electronic module (CEM) via the CAN network.

The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute Value 

• None.

Possible Source 

• Wiring short-circuited to ground
• Open-circuit in the wiring
• Contact resistance
• Half-burned fuse for the driver's door module/passenger door module (DDM/PDM).

Fault symptom[s] 

• The switch panel for the driver's door/passenger door does not work