Diagnostic Trouble Code (DTC) Information KVM-0110

Condition 

When the vehicle is to be started without a key, a so called "passive start", the Keyless vehicle module (KVM) performs a check via the Remote Keyless Entry (RKE). The Keyless vehicle module (KVM) checks that one of the key codes that is programmed in the control module corresponds with the key code that the Remote Keyless Entry (RKE) received from the remote key.

If the Keyless vehicle module (KVM) detects an incorrect key code, the Keyless vehicle module (KVM) will interpret this as a fault and store a DTC.

The diagnostic trouble code (DTC) can be diagnosed when the ignition is switched on.

Substitute Value 

• None.

Possible Source 

• Internal fault in the remote control.

Fault symptom[s] 

• No "Keyless vehicle" start.