Signal Too High: Verification

Fig 1: Identifying Ignition In Position II

Courtesy of VOLVO CARS CORPORATION

HINT: After carrying out the repair check that the fault has been remedied. 

• Ignition off.
• Reinstall the connectors, components etc.
• Ignition on.
• Check that the relay works by pressing on the VCT2000 (Volvo Scan Tool) symbol.

Fig 2: Identifying VCT2000 (Volvo Scan Tool) Diagnostic Tool Symbol In VIDA

Courtesy of VOLVO CARS CORPORATION

Is the function OK? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION