Checking The Component And Wiring
- Ignition off.
Check that the fuel pump (FP) relay is correctly installed.
Also check the fuel pump relay, in particular terminal #2. Check for a short-circuit to ground.
If no fault was found on the fuel pump relay and replacing the relay did not help, try replacing the central control module (CEM).
Remedy as necessary.
Other information
- see CONNECTING THE BREAKOUT BOX (2008-2012)
- see SIGNAL DESCRIPTION CENTRAL ELECTRONIC MODULE (CEM)
- For further information about the fuses and relays, see the appropriate service information
- see CONTROL MODULE RELAY BOX PASSENGER COMPARTMENT
- see CHECKING WIRING AND TERMINALS
- Continue
Refer to VERIFICATION