Checking The Component And Wiring
- Ignition off.
- Disconnect the connector for the right-hand subwoofer behind the rear seat.
Check the cable terminals. Check for contact resistance, loose connections and oxidation.
Check the cable terminals in the female and male sections of the connector. The cable terminals must not be damaged or pressed back.
Check the signal cable between the Subwoofer module (SUB) terminal #B5 and right-hand subwoofer terminal #2. Check for an open-circuit.
Check the signal cable between the Subwoofer module (SUB) terminal #B12 and right-hand subwoofer terminal #1. Check for an open-circuit.
Check the subwoofer cable terminals #1 and #2. Check for an open-circuit.
Remedy as necessary.
Other information
- see SIGNAL SPECIFICATION
- see CONNECTING THE BREAKOUT BOX
- see REAR SEAT BACKREST SPEAKER (2011)
- see SUBWOOFER MODULE (SUB) (2011)
- see CHECKING WIRING AND TERMINALS
- Continue
Refer to VERIFICATION