Replacing The Component

If the fault is intermittent, it has been registered previously but is no longer present. Intermittent faults can occur for a number of different reasons. The fault is evaluated depending on how it occurs.

If the fault is permanent, replace the control module.

Initialize the window position after replacing the control module. This is done using VIDA (Volvo scan tool).

Remedy as necessary.

Other information: 

• see DRIVER DOOR MODULE (DDM)
• see PASSENGER DOOR MODULE (PDM) .

Fig 1: Identifying Motor

Courtesy of VOLVO CARS CORPORATION

• Continue 

  Refer to VERIFICATION MIXED