Component Replacement
An intermittent fault is one that has been registered but no longer remains. Intermittent faults may arise as the result of several different causes. The fault is assessed on a case by case basis.
Check driver door/passenger door module (DDM/PDM) connector #A13 and left rear door/right rear door module (LDM/RDM) connector #6 for contact resistance and oxidation. Check especially for damage.
Also check intermediate connectors for contact resistance, oxidation and damage.
Check the communication cable between the driver door/passenger door module (DDM/PDM) and the left rear door/right rear door module (LDM/RDM) for open-circuit.
Measure between:
- Driver door/passenger door module (DDM/PDM) #A13 (#13) and left rear door/right rear door module (LDM/RDM) #6.
Remedy as necessary.
Other information:
- see CONNECTING THE BREAKOUT BOX, DRIVER DOOR MODULE / PASSENGER DOOR MODULE (DDM/PDM) (2008-2012)
- see SIGNAL SPECIFICATION
- see ELECTRIC MOTOR, LIFT MECHANISM, SIDE WINDOW REAR
- see CHECKING WIRING AND TERMINALS
- Continue
Refer to VERIFICATION POWER WINDOW MECHANISM