Replacing A Component
Avoid touching the pins in the control module and the corresponding connector on the cable harness.
There is a risk of static discharge which could damage the control module.
Discharge yourself and tools to be used by holding the tool's metal part and touching a body part on the car just before starting to work.
If voltage is approximately 0 V on terminal #B15 on the Engine Control Module (ECM), when the gear-shift position sensor is in position P or N, the circuit for the gear-shift position sensor is working.
The fault may be in the Engine Control Module (ECM).
Try replacing Engine Control Module (ECM).
Before replacing the control module, ensure that all other relevant symptom tests have been carried out.
Other information
- See replacing the Engine Control Module (ECM).
- Continue
Refer to VERIFICATION